Home > IEC Test Equipment >

IEC60947-1 2 Rpm 500mm IEC Test Equipment

Product Categories

IEC Test Equipment [161]
Testing Equipment [23]
IP Testing Equipment [30]
Home Appliance Testing Equipment [41]
Flammability Testing Equipment [73]
Ingress Protection Test Equipment [106]
Helium Leak Testing Equipment [49]
Cable Testing Equipment [81]
Battery Testing Equipment [30]
Impact Testing Machine [74]
Plug Socket Tester [203]
Test Finger Probe [101]
Electrical Appliance Tester [143]
Audio Video Test Equipment [53]
Tensile Strength Testing Machine [28]
Pump Testing Equipment [3]
Switch Tester [3]
Light Testing Equipment [29]
Automatic Brazing Machine [10]
Appliance Performance Test Lab [9]
Motor Test Bench [5]

Guangzhou HongCe Equipment Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60947-1 2 Rpm 500mm IEC Test Equipment

Name: IEC609471 2 Rpm 500mm IEC Test Equipment
Brand: HongCe
Price: 1 USD

Quality IEC60947-1 2 Rpm 500mm IEC Test Equipment wholesale

Brand Name : HongCe

Model Number : HC9903A

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1 set

Price : Negotiatable

Payment Terms : T/T

Supply Ability : 10 set /month

Delivery Time : 30 days

Packaging Details : plywood

standard : IEC60947-1

Test height : 250~500mm

Diameter of gyration : 75mm

Test rate : 10±2 RPM

Diameter of ferrule hole : 6.5~28.6mm

Test times : 0～9999

Contact Now

10 Rpm ± 2 Rpm IEC Test Equipment Flexion Test Apparatus For Conductors Height 250~500mm Bushing Within 15mm

Standard:
IEC 60947-1 ' Low-voltage switchgear and controlgear –Part 1: General rules ' clause 8.2.4.3, figure 1

Standard description:

The test is to be carried out with suitable test equipment. The specified number of conductors shall be connected to the terminal. The length of the test conductors should be 75 mm longer than the height H specified in Table 5. The clamping screws shall be tightened with a torque in accordance with Table 4 or with the torque specified by the manufacturer. The device tested shall be secured as shown in Figure 1 .

Each conductor is subjected to circular motions according to the following procedure:

The end of the conductor under test shall be passed through an appropriate size bushing in a platen positioned at a height H below the equipment terminal, as given in Table 5. The other conductors shall be bent in order not to influence the result of the test. The bushing shall be positioned in the horizontal platen concentric with the conductor. The bushing shall be moved so that its centreline describes a circle of 75 mm diameter about its centre in the horizontal plane at 1 0 rpm ± 2 rpm. The distance between the mouth of the terminal and the upper surface of the bushing shall be within 1 5 mm of the height H in Table 5. The bushing is to be lubricated to prevent binding, twisting or rotation of the insulated conductor. A mass as specified in Table 5 is to be suspended from the end of the conductor. The test shall consist of 135 continuous revolutions.

During the test, the conductor shall neither slip out of the terminal nor break near the clamping unit.

IEC60947-1 2 Rpm 500mm IEC Test Equipment

Application:
It is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.

Parameters:

Model	HC9903A
Test rate	10±2 RPM
Diameter of gyration	75mm
Test times	0-9999
Weights	0.2,0.3, 0.4, 0.7, 0.9, 1.4, 2, 2.9, 4.5, 5.9, 6.8, 8.6, 9.5, 10.4, 14, 15, 16.8, 20, 22.7kg (weights superimposed)
Test height	250~500mm
Diameter of ferrule hole	6.5mm, 9.5mm, 13mm, 14.5 mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm and 28.6mm, 9 pc
Standards	IEC60947-1

Weight list table:

No.	Weight mass(kg)	Quantity
1#	0.2 with hook	1 pc
2#	0.3 with hook	1 pc
3#	0.4 with hook	1 pc
4#	0.7 with hook	1 pc
5#	0.7 through hole	2 pc
6#	0.9 with hook	1 pc
7#	0.9 through hole	2 pc
8#	1.4with hook	1 pc
9#	2 with hook	1 pc
10#	2 through hole	1 pc
11#	2.3 through hole	1pc
12#	4.5 with hook	1 pc
13#	4.5 through hole	1pc
14#	6.8 with hook	1 pc
15#	6.8 through hole	1 pc
16#	8 .2with hook	1 pc

Weights collocation table:

Required mass (kg)	Collocation
0.2	1#
0.3	2#
0.4	3#
0.7	4#
0.9	6#
1.4	8#
2	9#
2.9	9#+7#
4.5	12#
5.9	12#2*5#
8.6	14#+2*7#
9.5	9#+13#+11#+5#
10.4	12#+13#+2*5#
14	14#+13#+10#+5#
15	16#+15#
16.8	16#+13#+11#+2*7#
20	16#+15#+11#+10#+5#
22.7	16#+15#+13#+11#+7#

IEC60947-1 2 Rpm 500mm IEC Test Equipment

Product Tags:

IEC60947-1 2 Rpm 500mm IEC Test Equipment Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Guangzhou HongCe Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC60947-1 2 Rpm 500mm IEC Test Equipment

IEC60947-1 2 Rpm 500mm IEC Test Equipment

500mm IEC Test Equipment

IEC 60947-1 IEC Test Equipment

2 Rpm IEC Test Equipment

IEC60947-1 2 Rpm 500mm IEC Test Equipment Images